- Home
- Resources
- Work samples
- Samples
- Design project: All systems go - ABOVE
Design and Technologies
Years 3 and 4
Above satisfactory
Design project: All systems go
![](/media/1908/design-3-4-ab-ws2-a1-2015-2-page-1.jpg)
Illustrates how a hydraulic system can be used to move the jib of a crane 2 Annotation 2
Uses a drawing with annotations to describe a designed solution
-
Annotations
-
1
Annotation 1
Illustrates how a hydraulic system can be used to move the jib of a crane -
2
Annotation 2
Uses a drawing with annotations to describe a designed solution
![](/media/1664/design-3-4-ab-ws2-a1-2015-2-page-2.jpg)
Describes how the technology of hydraulics can be used to cause movement, i.e. to push an egg 2 Annotation 2
Describes how the technology of hydraulics can be used to move a lever, i.e. the jib of the crane 3 Annotation 3
Uses a drawing with annotations to describe the detail of a designed solution 4 Annotation 4
Communicates design ideas using a description and drawings to explain how a brace gives strength to a tower on a crane
-
Annotations
-
1
Annotation 1
Describes how the technology of hydraulics can be used to cause movement, i.e. to push an egg -
2
Annotation 2
Describes how the technology of hydraulics can be used to move a lever, i.e. the jib of the crane -
3
Annotation 3
Uses a drawing with annotations to describe the detail of a designed solution -
4
Annotation 4
Communicates design ideas using a description and drawings to explain how a brace gives strength to a tower on a crane
![](/media/1663/design-3-4-ab-ws2-a1-2015-2-page-3.jpg)
Illustrates how hydraulics are used to tilt the bucket on a crane
-
Annotations
-
1
Annotation 1
Illustrates how hydraulics are used to tilt the bucket on a crane
![](/media/1665/design-3-4-ab-ws2-a1-2015-2-page-4.jpg)
Plans the materials and equipment needed to make the model of a hydraulic system 2 Annotation 2
Describes how the model was produced
-
Annotations
-
1
Annotation 1
Plans the materials and equipment needed to make the model of a hydraulic system -
2
Annotation 2
Describes how the model was produced
![](/media/1659/design-3-4-ab-ws2-a1-2015-2-page-5.jpg)
Records final designed solution
-
Annotations
-
1
Annotation 1
Records final designed solution
![](/media/1660/design-3-4-ab-ws2-a1-2015-2-page-6.jpg)
Investigates and reports on hydraulic and pneumatic systems
-
Annotations
-
1
Annotation 1
Investigates and reports on hydraulic and pneumatic systems
![](/media/1662/design-3-4-ab-ws2-a1-2015-2-page-7.jpg)
![](/media/1661/design-3-4-ab-ws2-a1-2015-2-page-8.jpg)
Below satisfactory
Design project: All systems go
![](/media/1677/design-3-4-b-ws2-a1-2015-1-page-1.jpg)
Uses a drawing with annotations to communicate a designed solution
-
Annotations
-
1
Annotation 1
Uses a drawing with annotations to communicate a designed solution
![](/media/1674/design-3-4-b-ws2-a1-2015-1-page-2.jpg)
Evaluates the designed solution
-
Annotations
-
1
Annotation 1
Evaluates the designed solution
![](/media/1675/design-3-4-b-ws2-a1-2015-1-page-3.jpg)
Identifies the materials and equipment needed to make the model of the solution 2 Annotation 2
Communicates design ideas using labelled drawings
-
Annotations
-
1
Annotation 1
Identifies the materials and equipment needed to make the model of the solution -
2
Annotation 2
Communicates design ideas using labelled drawings
![](/media/1676/design-3-4-b-ws2-a1-2015-1-page-4.jpg)
Records final designed solution
-
Annotations
-
1
Annotation 1
Records final designed solution
Satisfactory
Design project: All systems go
![](/media/1670/design-3-4-at-ws2-a1-2015-6-page-1.jpg)
Describes how the technology of hydraulics can be used to open and shut a door
-
Annotations
-
1
Annotation 1
Describes how the technology of hydraulics can be used to open and shut a door
![](/media/1673/design-3-4-at-ws2-a1-2015-6-page-2.jpg)
Identifies the materials and equipment needed to make the model of the solution 2 Annotation 2
Describes how the hydraulics can be used to push the egg up a slide (inclined plane) 3 Annotation 3
Develops design ideas using a model 4 Annotation 4
Evaluates the designed solution and modifies the design to improve function
-
Annotations
-
1
Annotation 1
Identifies the materials and equipment needed to make the model of the solution -
2
Annotation 2
Describes how the hydraulics can be used to push the egg up a slide (inclined plane) -
3
Annotation 3
Develops design ideas using a model -
4
Annotation 4
Evaluates the designed solution and modifies the design to improve function
![](/media/1671/design-3-4-at-ws2-a1-2015-6-page-3.jpg)
Uses a drawing with annotations to communicate a designed solution
-
Annotations
-
1
Annotation 1
Uses a drawing with annotations to communicate a designed solution
![](/media/1672/design-3-4-at-ws2-a1-2015-6-page-4.jpg)
Communicates design ideas by explaining how the ramp (inclined plane) and hydraulics function
-
Annotations
-
1
Annotation 1
Communicates design ideas by explaining how the ramp (inclined plane) and hydraulics function
![](/media/1667/design-3-4-at-ws2-a1-2015-6-page-5.jpg)
Records final designed solution
-
Annotations
-
1
Annotation 1
Records final designed solution
![](/media/1666/design-3-4-at-ws2-a1-2015-6-page-6.jpg)
Investigates and creates a brief report on hydraulic and pneumatic systems
-
Annotations
-
1
Annotation 1
Investigates and creates a brief report on hydraulic and pneumatic systems
![](/media/1668/design-3-4-at-ws2-a1-2015-6-page-7.jpg)
![](/media/1669/design-3-4-at-ws2-a1-2015-6-page-8.jpg)
Above satisfactory
Design project: All systems go
![](/media/1908/design-3-4-ab-ws2-a1-2015-2-page-1.jpg)
Illustrates how a hydraulic system can be used to move the jib of a crane 2 Annotation 2
Uses a drawing with annotations to describe a designed solution
-
Annotations
-
1
Annotation 1
Illustrates how a hydraulic system can be used to move the jib of a crane -
2
Annotation 2
Uses a drawing with annotations to describe a designed solution
![](/media/1664/design-3-4-ab-ws2-a1-2015-2-page-2.jpg)
Describes how the technology of hydraulics can be used to cause movement, i.e. to push an egg 2 Annotation 2
Describes how the technology of hydraulics can be used to move a lever, i.e. the jib of the crane 3 Annotation 3
Uses a drawing with annotations to describe the detail of a designed solution 4 Annotation 4
Communicates design ideas using a description and drawings to explain how a brace gives strength to a tower on a crane
-
Annotations
-
1
Annotation 1
Describes how the technology of hydraulics can be used to cause movement, i.e. to push an egg -
2
Annotation 2
Describes how the technology of hydraulics can be used to move a lever, i.e. the jib of the crane -
3
Annotation 3
Uses a drawing with annotations to describe the detail of a designed solution -
4
Annotation 4
Communicates design ideas using a description and drawings to explain how a brace gives strength to a tower on a crane
![](/media/1663/design-3-4-ab-ws2-a1-2015-2-page-3.jpg)
Illustrates how hydraulics are used to tilt the bucket on a crane
-
Annotations
-
1
Annotation 1
Illustrates how hydraulics are used to tilt the bucket on a crane
![](/media/1665/design-3-4-ab-ws2-a1-2015-2-page-4.jpg)
Plans the materials and equipment needed to make the model of a hydraulic system 2 Annotation 2
Describes how the model was produced
-
Annotations
-
1
Annotation 1
Plans the materials and equipment needed to make the model of a hydraulic system -
2
Annotation 2
Describes how the model was produced
![](/media/1659/design-3-4-ab-ws2-a1-2015-2-page-5.jpg)
Records final designed solution
-
Annotations
-
1
Annotation 1
Records final designed solution
![](/media/1660/design-3-4-ab-ws2-a1-2015-2-page-6.jpg)
Investigates and reports on hydraulic and pneumatic systems
-
Annotations
-
1
Annotation 1
Investigates and reports on hydraulic and pneumatic systems
![](/media/1662/design-3-4-ab-ws2-a1-2015-2-page-7.jpg)
![](/media/1661/design-3-4-ab-ws2-a1-2015-2-page-8.jpg)